Armytek Viking Pro Warm Panduan Cepat
Jelajahi secara online atau unduh pdf Panduan Cepat untuk Senter Armytek Viking Pro Warm. Armytek Viking Pro Warm 2 halaman. Armytek viking pro; viking pro warm flashlights
Halaman Cetak
Armytek Viking PRO
The most technically advanced flashlights in the world.
Specifications
Armytek Optoloelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed
especially for your needs applying in them components made in USA and Japan. 10 years no-hassle warranty.
Incredibly bright light 850 lumen and wide beam angle
Excellent beam throw up to 250 meters for illumination of distant objects
Ultra strong body and effective electronics assure reliability in any conditions
Constant brightness in any mode — even with almost discharged battery and in low temperatures
Almost 2 hours of operationin high mode and 4 months of operation in Firefly mode with only one battery
Fully programmable settings: from the number of modes to the type of stabilization
Special modes: blinding Strobe for Special Forces and self-defense, SOS and Beacon for extreme situations
Model
LED
Brightness stabilization type
Light output, LED lumen
Hotspot / Spill
Beam distance
Hotspot diameter at 330 feet
/100 meters
Modes and Runtimes
(measured for Panasonic 18650 Li-Ion NCR
3100mAh battery to the decrease to 10% of initial
brightness)
Recommended power source
Size
Weight (without batteries)
Set description
2
x
1. The flashlight and package can inconsiderably differ from the pictures in the manual.
2. The producer reserves the right to change the package at his own discretion without modifying this manual.
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
Viking PRO
Viking PRO Warm
Cree XM-L2
Cree XM-L2 (Warm)
FULL stabilization (constant brightness)
850 lm
760 lm
10 / 40 degrees
10 / 40 degrees
270 yard / 250 meters
220 yard / 200 meters
52 feet /16 meters
52 feet /16 meters
850 lm / 1 h 40 min
760 lm / 1 h 40 min
200 lm / 7 h
180 lm / 7 h
70 lm / 20 h
62 lm / 20 h
6 lm / 155 h
6 lm / 155 h
1x18650 Li-Ion / 2xR123 Li-Ion / 2xCR123A
Length 6.1"/155mm, head diameter 1.56"/39.5mm, body diameter 1"/25.4mm
5.82 oz /165 g
Items included in the package:
Flashlight
Holster
Lanyard
2 spare O-rings
Spare rubber button
Clip
Rubber grip (is put on flashlight)
Rubber ring to substitute the grip
User manual
Born to exceed.
QUICK GUIDE
1. Always follow the instructions from this manual and recommendations on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not use different power sources together, including old ones with new ones, charged
with discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5. Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6. Do not allow water or any other liquid to leak into the flashlight.
7. Do not aim a turned on flashlight at people's or animals' eyes — it can cause temporary
blindness.
8. Be careful during the long-time flashlight operation as some parts of the body may heat up.
9. Do not allow children to use the flashlight without your assistance.
10. Be careful while using rechargeable batteries — Armytek flashlights are designed to
consume all the available battery power and don't protect batteries from over-discharge.
Armytek Optoelectronics Inc., Canada shall not be liable for any harm done to the user if it was caused by
improper use of the product.
The most technically advanced flashlights in the world.
www.armytek.com
Initial Service
To set/replace batteries:
1. Unscrew the tailcap.
2. Place the batteries with the positive contact (+) facing the
head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
We recommend NOT to leave power sources inside the
flashlight for a long storage period, as batteries (especially,
non-rechargeable) can leak for various reasons and damage
the inner parts of the flashlight. If you want to keep your
flashlight in a stand-by state with batteries in, use new and
quality batteries, store the flashlight in acceptable for
batteries operational temperature and revise the batteries'
state at least once a month. If you have noticed any signs of
batteries' defects, withdraw them from the flashlight and take
out of operation. It is also recommended to replace discharged
batteries with new ones before the storage as the chance of
leakage is higher with discharged batteries.
Initial Service
Born to exceed.