Discount Car Stereo A2D-MB23 Panduan Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Stereo Mobil Discount Car Stereo A2D-MB23. Discount Car Stereo A2D-MB23 7 halaman. Bluetooth music streaming for sprinter and blaupunkt aux ready radios
Halaman CetakPRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Requirements:
aux ready radios
Introduction
Just because you drive an older car does not mean you have to settle for old
technology. The A2D-MB23 provides a Bluetooth Music Streaming solution for
any A2DP Smartphones which then allows these radio owners to stream music
without wires. Most Phones with Bluetooth 2.x, 3.0 etc. include the A2DP profile.
Installing this adapter to Mercedes Sprinter radio requires sacrificing the CD
changer (if present), but with the storage capacity of these new devices
sacrificing the CD changer should be an easy decision.
Installation (Sprinter)
Remove radio from the dashboard to gain access to the connectors. A pair of
removal tools (See Fig. 1) is required to remove Sprinter Sound 10/20/30
radios.
Radio removal Tools
.
Fig. 1
To remove radio, slide both tools into slots on radio to their detent
1.
position. Withdraw the radio by pulling outwards on the tools.
For specific use of the removal tools, click
Once radio has been removed, connect 10-pin plug from adapter
2.
harness (See Fig. 3) to (C) slot on radio (See Fig. 4)
Fig. 3
10-pin plug
Fig. 4
Sound 10/20/30 radio connectors
here
Fig. 2