Discount Car Stereo A2D-MBR Panduan Instalasi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Sistem Stereo Mobil Discount Car Stereo A2D-MBR. Discount Car Stereo A2D-MBR 5 halaman. For select 1994-98 mercedes benz

Halaman Cetak

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Requirement:

CD changer controlling radio

Introduction

Just because you drive an older car does not mean you have to settle for old

technology. In order to stay up to speed with fast changing technology, many

Mercedes owners have opted to change the factory radio in favor of one that

offers modern features such as Bluetooth, navigation etc. but those adamant

about keeping their cars as original possible, we offer the A2D-MBR. With a

smartphone plus A2D-MBR; users may upgrade factory radio in select 1994-98

Mercedes Benz to support many features offered by aftermarket radio including

music streaming, navigation, audio books, and more. Simply connect module to

10-pin CD changer port behind radio, pair Bluetooth device (e.g., Smartphone,

iPad, Tablet, Kindle etc.) and enjoy those application on the car speaker system!

Installing the A2D-MBR means optional CD changer (if present), must be

disconnected, however; to retain the CD changer, purchase our A2D-MBRCD.

Installation

Installing this module requires radio removal

Remove radio from dashboard to gain access to connectors. A pair of removal

tools (See Fig. 1) is required to remove radio.

Fig. 1

removal

tool

this radio

does not apply.

Slide tools into slots (straight edge facing away) to detent position.

Withdraw radio by pulling outwards on the tools. See Fig. 2

Click

here

for more detailed radio removal instructions.

Fig. 2