Discount Car Stereo iP2D-BKR Panduan Instalasi Mulai Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi Mulai Cepat untuk Sistem Stereo Mobil Discount Car Stereo iP2D-BKR. Discount Car Stereo iP2D-BKR 10 halaman. Music streaming module for becker radios with aux menu option
Juga untuk Discount Car Stereo iP2D-BKR: Panduan Instalasi Mulai Cepat (9 halaman)

Halaman Cetak

10. I'm getting noise that increases with engine speed. Is this normal?

If you experience alternator whine (increases with engine speed), we

recommend adding a noise filter (e.g. NF3A) to power/ground supply lines.

Here is how to install noise filter:

If necessary, remove black tape from harness.

(You will be working with black and red wires on black plug (to radio) See

Fig. 12— DO NOT CUT FACTORY WIRES

a. Cut red and black wire about 2 inches away from 8-pin plug

b. Connect filter OUT red wire to red wire (from module)

c. Connect Filter OUT black wire to black wire (from module)

d. Connect filter IN red wire to red wire (To filter In)

e. Connect filter IN black wire to black wire (To filter in)

Disclaimer

• This product has no affiliation with Porsche, Becker etc.

• We're not liable for misuse of this product.

•We recommend professional installation.

[email protected]

is subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders

Fig. 12