Discount Car Stereo JAG-CD Panduan Instalasi Mulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi Mulai Cepat untuk Sistem Stereo Mobil Discount Car Stereo JAG-CD. Discount Car Stereo JAG-CD 6 halaman. For jaguar x308 and x100 with cd changer

Halaman Cetak

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

Requirements

CD auto changer

Introduction

Those Jaguar owners who are adamant about hanging on to the original radio

and audio system we offer a line of adapters that sure to open up a whole lot of

different options for listening to music and other audio content.

adapter provides a 3.5mm Audio jack which can be used to connect and play all

kinds of audio devices including Smartphones, MP3 Players, iPods, Zune, iPads

etc. The JAG-CD auxiliary input adapter does not control or charge audio device

and connects to the back of the radio in late 1997-99 XJ (X308) and XK (X100)

Standard OR Premium Audio Systems

06 XK (X100)

Standard Audio Systems

questions at the end of this guide for more details.

Installation

Warning: The JAG-CD connects to the radio (not to Changer) and radio removal is

required.

All 2000-03 x308 and 2000-06 x100 premium sound system (amplifier)

requires the

JAG-CDR

The JAG-CD

and 2000-03 XJ (X308) and 2000-

only. See Frequently Asked

This step may not be necessary but we recommend disconnecting the

Negative Battery Terminal (See Fig. 1)

Fig. 1

Move "J" gate selector to position "D"

Using a panel removal tool, unclip and remove "J" gate finisher (See

Fig. 2)

Fig. 2

Using a T30 torx head, remove "J" gate finisher plate (See Fig. 3)

Fig. 3