Discount Car Stereo AUX-JAG Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Mobil Discount Car Stereo AUX-JAG. Discount Car Stereo AUX-JAG 9 halaman. Aux input installation guide for jaguar x308 & x100 with cd changer

Halaman Cetak

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and may

require additional steps. We do not accept responsibility for third party labor charges or

modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from the

installation of this product.

Careless installation and operation can result in equipment damage

•

Requirement

Functional cd changer

Introduction

Many Jaguar owners looking for a simple but effective way of connecting portable

audio devices to their cars without changing the look and feel of dashboard

components; namely the radio will be thrilled to find this adapter. The AUX-JAG and

AUX-JAGR does not control or charge audio devices but allows users to connect

and play their audio devices in 1998-03 XJ (X308) and 1997-06 XK (X100) with CD

Changer.

Keep in mind, CD changer remains connected but will no longer

retain use of the changer, purchase our

JAG-CDR. See Frequently Asked question at the end of this guide for more

details.

AUX-JAG Installation-

Warning: In 1997*-99 XK and 1998-99 XJ, the AUX-JAG connects to radio. It also

connects at the radio in 2000-06 XK and 2000-03 XJ Standard audio

System (without amplifier).

The AUX-JAG does not work in 2000+

Premium Audio System --- These require our

JAG-CD

connects to the back of the radio

AUX-JAGR

Although not necessary, we recommend disconnecting negative battery terminal

(See Fig. 1)

Move "J" gate selector to position "D"

2. Using a panel removal tool, unclip and remove "J" gate finisher (See Fig.

play. To

3. Using a T30 Torx driver, remove "J" gate finisher plate (See Fig. 3)

Fig. 1

Fig. 2