Discount Car Stereo A2D-MBFM Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Discount Car Stereo A2D-MBFM. Discount Car Stereo A2D-MBFM 5 halaman.
Halaman CetakConnect antenna terminal marked "TO RADIO" (See Fig. 4) to vacated antenna
4.
socket on radio.
By default, the modulator tuning frequency is set to 87.9MHz. If for any reason
5.
you need to change to 88.3MHz; locate module Frequency switch (top left), insert
small screwdriver etc. and move switch to frequency mark seen in Fig. 5
Connect RED wire to an accessory (key on) circuit in your vehicle
6.
We suggest tapping wire at pin A7 of radio power/harness (See Fig. 6)
Fig. 4
Factory plug
Fig. 5
Connect BLACK wire to ground.
7.
We suggest removing radio chassis screw and securing ground terminal as seen
in Fig. 7.
Secure module behind radio cavity and proceed to Pairing.
8.
Fig. 6
radio connector
Fig. 7