Discount Car Stereo AUX-GM3 Panduan Instalasi Mulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi Mulai Cepat untuk Penerima Mobil Discount Car Stereo AUX-GM3. Discount Car Stereo AUX-GM3 4 halaman. Gm class ii radios with external cd 6-disc changer, xm tuner or rse

Halaman Cetak

3. Connect harness 12-pin plug (See Fig. 3) into radio 12-pin connector

vacated in step 1

Fig. 3

12-pin plug

4. Carefully route audio jack (See Fig. 4) to a location on dash or nearby

where it will be mounted (within 4 ft.).

Fig. 4

5. Optional: Drill a 9/64" or 5/32" hole in dash or panel, push audio jack

shaft through and secure with nut (See Fig. 5)

Fig. 5

Warning: Jack may be left freestanding, but to be mounted, ensure

panel is less than 4mm thick otherwise shaft may not protrude

enough to engage with nut. If necessary, use dremel, sander etc. to thin

panel or choose alternate mounting location.

Operation

Turn radio "ON"

2. Press "BAND" or "CD/AUX "button (depends on vehicle option)

If subscribed, most recent XM channel or if equipped with remote CD

changer, select track will play

3. Connect audio device to 3.5mm jack using included 3 ft. audio cable

(See Fig. 6) or similar

4. Press play on audio device. XM or CD Changer playback is interrupted.

3.5mm Male-Male audio cable

5. Use radio volume button to set playback level.

Warning: Playlist and Track selection is *NOT* possible from the Radio.

You must use the audio devices built-in controls to access audio files

6. To listen to XM, Remote (external) CD changer or DVD Player, simply

disconnect 3.5mm audio cable from jack and operate XM/ CD

changer/DVD as customary. (Jack must be empty)

7. If correct operation is confirmed go ahead and reinstall the GM radio

Fig. 6