BLADEZ ION 150 Prosedur Pemecahan Masalah - Halaman 8
Jelajahi secara online atau unduh pdf Prosedur Pemecahan Masalah untuk Skuter BLADEZ ION 150. BLADEZ ION 150 12 halaman. Electric power board
Juga untuk BLADEZ ION 150: Buku Panduan Produk (13 halaman)
Halaman Cetak
Check belt tightness
1. Raise the rear wheel and clamp the amp-meter on the red battery cable as shown, then depress throttle lever and turn the rear
wheel to start the scooter. Make sure that you measure the DC current (not AC ~ ), the reading would prefer to be around 1.9 –
2.3 A. Any reading below or above these ranges would consider as too loose or too tight respectively.