DISCOVER 950-0040 Panduan Instalasi dan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Gerbang DISCOVER 950-0040. DISCOVER 950-0040 14 halaman.

NOTE

A powered USB hub may be required.

Open LYNK ACCESS. LYNK LITE configurations and settings can be found by

selecting the LYNK tab.

7.0 Configuring the CAN Communication with LYNK ACCESS

Connect the LYNK and open LYNK ACCESS. Ensure that you only have one

LYNK device connected to the Computer.

Open LYNK ACCESS and select the LYNK tab. Select the blue gear icon in the

upper right area of the CAN Settings tile.

Select one of the pre-configured Closed-Loop Protocols. To complete the

configuration enable or disable termination for the CAN Out port as required.

Click SAVE to confirm the configuration.

Refer to the appropriate application note for instructions on setting the

external device to communicate correctly with LYNK LITE. Up-to-date

application notes for various external devices are available from the Discover

Battery website.