AbbeyRoad Brilliance Pack Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ekualiser Stereo AbbeyRoad Brilliance Pack. AbbeyRoad Brilliance Pack 11 halaman. Version 1.0 plug-ins for tdm and native

Halaman Cetak

And so, in the spirit of the '60s, we have included this "not so precise" effect by providing

two RS127 plug-ins: the grey rack version and the green standalone unit with the

transformer effect. I have seen old setups where engineers used two RS127s in series for

heavy EQ treatment, and I can highly recommend using these EQs on guitars, keyboards

and vocals. If you find that +/-10 dB is not enough, do what they did back then – use two of

them!

The RS135

The RS127 was primarily made to supplement the 5 kHz REDD desk EQ, and proved to be

immensely useful and popular. However, there was still a need to boost frequencies

between 5 kHz and 10 kHz.

EMI 8 kHz boost boxes were widely used but little was know about them. Only recently,

when putting this project together, Lester removed the 8 kHz label (incidentally, made with a

Dymo prototype) and found on the reverse that these boxes were in fact originally RS135s.

Our researchers have shown that these boxes were designed for a 16.4 kHz boost, but

modifications made at the time choked this frequency by half – enabling engineers to boost

signals at 8 kHz. We have decided to add this to our 'Brilliance' suite, thus completing the

range of presence EQs that were significantly used at Abbey Road in the '60s.

Peter Cobbin, Director of Engineering, Abbey Road Studios

April 2008