ARO 8509-A Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Obeng Daya ARO 8509-A. ARO 8509-A 19 halaman. “o” series “qrt” screwdrivers

GEARING SECTION

DRIVE GEARING

DISASSEMBLY

Remove spindle and components from ring gear.

To remove gears from spindle, remove bearing, spacer and

shafts.

ASSEMBLY

NOTE: Pack bearings and lubricate gears liberally with ARO

33153 grease upon assembly. Gearing assembly should contain

approximately 1/8 oz. (3.5 g) of grease.

a. Assemble spacer (33691 or 33693) and gears to spindle and

secure with shafts, aligning notch in shafts with spacer.

NOTE: Shafts (33686) contain fifteen (15) loose needle bear-

ings (33458) per shaft.

b. Assemble spacer (37676), where applicable, and bearings to

spindle and assemble to ring gear.

32325 BEARING

39325 RING GEAR

36324 GEARING ASSEMBLY

5.5:1

36326 SPINDLE

32325 BEARING

36325 RING GEAR

33691 SPACER

(9 INTERIOR - 17 EXTERIOR TEETH)

37676 SPACER

36327 GEARING ASSEMBLY

3.4:1

32325 BEARING

36325 RING GEAR

36329 GEARING ASSEMBLY

6.8:1

36330 SPINDLE

32325 BEARING