3D Hobby Shop SLICK 540 Panduan Perakitan - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3D Hobby Shop SLICK 540. 3D Hobby Shop SLICK 540 19 halaman.

that there is no friction or binding of the rudder.

Take THIN CA glue and go over the motor mount assembly, applying a small amount of glue to all the

seams. This is the highest-stress area of the airframe, and we want to make it as strong as possible.

Your airplane includes a pre-drilled firewall with pre-installed blind nuts that fit Omega, Torque, Reaper,

Hacker, and other popular brands of brushless motors. If your brand of motor uses a different bolt

pattern, use your hobby knife to carefully remove the blind nuts and plywood circle spacers from the back

of the firewall, and then re-drill the firewall for your motor.

Assemble brushless outrunner motor as shown for mounting in front of the firewall surface. The prop

adaptor should be on the OPPOSITE side of the motor from the mount.