ARO RS23A–VLV–EU Panduan Operator - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Operator untuk Sander ARO RS23A–VLV–EU. ARO RS23A–VLV–EU 8 halaman. Random orbital sanders rs2**a series; rs2**a-***-eu;

Halaman Cetak

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.

WARNING

Always wear eye protection

when operating or perform-

ing maintenance on this

tool.

WARNING

Air powered tools can vibrate

in use. Vibration, repetitive

motions or uncomfortable po-

sitions may be harmful to your

hands and arms. Stop using

any tool if discomfort, tingling

feeling or pain occurs. Seek

medical advice before resum-

ing use.

WARNING

Keep body stance balanced

and firm. Do not overreach

when operating this tool.

•

Use only a sanding pad, buffing wheel or

polishing bonnet with these tools. Do not use

any grinding wheel, bur or metal removing

accessory other than a sanding pad with

these tools. Never use an accessory having a

maximum operating speed less than the free

speed of the Sander in which it is being used.

•

These Sanders will operate at the free speed

specified on the nameplate if the air supply

line furnishes 90 psig (6.2 bar/620 kPa) air

pressure at the tool. Operation at higher air

pressure will result in excessive speed.

•

Do not operate this Sander away from the

work surface.

•

Check for excessive speed and vibration

before operating.

•

Do not use this tool if actual free speed

exceeds the nameplate rpm.

•

Never exceed the rated rpm of tool.

WARNING LABEL IDENTIFICATION

WARNING

Always wear hearing

protection when operating

this tool.

WARNING

Do not carry the tool by

the hose.

WARNING

90 psig

Operate at 90 psig (6.2 bar/

(6.2bar/620 kPa)

620 kPa) Maximum air pressure.

SANDER SPECIFIC WARNINGS

Do not use damaged, frayed

or deteriorated air hoses

and fittings.

WARNING

Read the manual before

operating this tool.

Operate at 90 psig/6.2 bar max.

PN 48176–1 LABEL

(NON–EU MODELS)

This label must appear on the tool at all times. If it is lost or

damaged, a replacement label is available at no cost.

•

Repeated prolonged operator exposure to

vibrations which may be generated in the use

of certain hand–held tools may produce

Raynaud's phenomenon, commonly referred

to as Whitefinger disease. The phenomenon

produces numbness and burning sensations

in the hand and may cause circulation and

nerve damage as well as tissue necrosis.

Repetitive users of hand–held tool who

experience vibrations should closely monitor

duration of use and their physical condition.

•

When using a pad having a shank, insert the

shank to full depth in the collet. When using a

pad on a threaded arbor, make certain the

flange nut is tightened securely. Check the

tightness of the collet nut or flange nut before

operating a Sander to make certain it will not

loosen during operation.

•

Always use the recommended ARO Guard

furnished with the Sander.

WARNING

Always turn off the air sup-

ply and disconnect the air

supply hose before install-

ing, removing or adjusting

any accessory on this tool,

or before performing any

maintenance on this tool.

WARNING

PN 49883 LABEL

(–EU MODELS)

M10

129