Cubert S185 Panduan Pengoperasian Perangkat Keras - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengoperasian Perangkat Keras untuk Kamera Digital Cubert S185. Cubert S185 17 halaman.

4.3 Connecting the control cable (optional)

The 4-poled jack at the rear of the camera can be used to enable external

trigger capabilities of the camera. Please use an M8 4-pin connector.

The camera will trigger on an 11V-30V/6-10mA pulse. The pins of the

trigger port are used as follows:

For mounting the camera it has a M5 screw socket at the lower planar surface. In order to avoid accidental

camera release, use a screw lock. Additionally, we recommend securing the camera by implementing a

back-up fixation to a UAV with a wire loop.

If your camera comes with the optional tilted mirror, you can attach it with four M2x4mm screws.

M8 4 pins

n.c.