3D innovations DeskCycle Ellipse Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Kebugaran 3D innovations DeskCycle Ellipse. 3D innovations DeskCycle Ellipse 12 halaman.
Halaman Cetak
- 1. Table of Contents
- 2. Assembly - Installing the Foot Panels
- 3. Installing and Removing the Display
- 4. Using the Display
- 5. Display Stand for Your Desk
- 6. Free Online Calorie Calculator
- 7. Foot Placement for Motion Type
- 8. Carrying the Bike
- 9. Adjusting the Resistance
- 10. Locking the Deskcycle to Your Desk
- 11. Optional Accessories
- 12. Care and Maintenance
- 13. Support
- 14. Full 1 Year Warranty in the US
There are two numbers on the display; one on the top and one on the bottom. See the image below.
•
The Top Number always displays the total number of revolutions you've pedaled the bike since the
display was last reset. The display will keep track of up to 99,999 revolutions.
•
The Bottom Number displays RPM, Time or Calories.
The Mode Select Button
Press the Mode Select Button to select what
the bottom number displays.
Each time you press the Mode Select Button,
the mode changes between the 4 modes
below:
1. SCAN (RPM, TIME and CALS)
2. RPM
(Revolutions Per Minute)
3. TIME
(Time)
4. CALS
(Estimated Calories)
SCAN Mode
When the Scan Mode Indicator is visible, the
lower number will cycle between displaying
RPM, Time and Calories. Each will be
displayed for about 5 seconds at a time.
RPM Mode When the RPM Indicator is visible, the bottom number
displays your average pedal speed in Revolutions Per Minute. The
image to the right shows 0 RPM, which means the bike is not being
pedaled. Also note that the Pedaling Indicator is not displayed.
TIME Mode
When the Time Indicator is visible, the bottom number displays the
total time you've used the bike since the display was last reset. The
image to the right shows 26 minutes and 25 seconds.
CALS Mode
When the Calorie Indicator is visible, the bottom number displays an
estimate of the number of calories burned since the display was last
reset. The image to the right shows 190 calories.
How to Reset Revolutions, Time and Calories
Time, Distance and Calories are accumulated as you pedal. To reset these all to zero, simply press and
hold the Mode Button for about 3 seconds.
How to Turn the Display On and Off
The display automatically turns on when you pedal the bike. You can also turn the display on by
pressing the Mode Button. The display automatically turns off a few minutes after you stop pedaling.
4