3D innovations DeskCycle2 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Kebugaran 3D innovations DeskCycle2. 3D innovations DeskCycle2 16 halaman.
Halaman Cetak
Step 1: Install the Large Leg
•
Remove the nuts and washers from the Large Leg.
•
Align the bolts of the Large Leg with the holes in the
Bike, and push the bolts through the holes.
•
Attach a Washer and a Nut to each bolt.
Do NOT tighten the nuts until step 3.
Step 2: Install the Small Leg
•
Remove the nuts and washers from the Small Leg.
•
Align the bolts of the Small Leg with the holes in the
Bike, and push the bolts through the holes.
•
Attach a Washer and a Nut to each bolt.
Do NOT tighten the nuts until step 3.
2