3D LabPrint Avion Airplanes Duck Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mainan 3D LabPrint Avion Airplanes Duck. 3D LabPrint Avion Airplanes Duck 13 halaman.
Halaman Cetak
Avion
airplanes
Fuselage assembly
You will need
F_1, F_2, F_3, F_4, F_L_Rib, F_R_Rib, Motor_mount, CA glue,
Activator, Snap-off knife,
1.
Glue
ø1x285mm carbon rod 2x
with
medium CA glue into
F_1
part.
If you have problem with
printing very end of
the
F_1
part, use putty
to fill imperfections.
2.
Glue
F_1
and
F_2
with medium CA.
DUCK user manual
ø1x285mm carbon rod 2x
Fuselage assembly
3.
Glue
F_2
and
F_3
with medium CA.
4.
Glue
Motor_mount
and
F_4
together with medium CA.
Before applying CA glue make sure,
that parts fits together easily.
f
I
Avion Airplanes
avion_airplanes
6