CubiScan 110-XT Pengaturan
Jelajahi secara online atau unduh pdf Pengaturan untuk Alat Ukur CubiScan 110-XT. CubiScan 110-XT 2 halaman.
Halaman CetakCUBISCAN 110-XT SETUP
QUICK REFERENCE GUIDE
This quick reference guide provides an overview and instructions for assembling and setting up the
Cubiscan 110-XT. For more detailed instructions, see the Cubiscan 110-XT Operations and Technical Manual.
In the box
Upon opening the box, you'll
find the following items:
Cubiscan 110-XT Components
A
B
D
E
(A) back panel (B) scale platform (C) display
(D) Left sensor (E) Right sensor (F) top sensor
Tools
G
(G) 4mm Allen wrench (H) calibration cube, 12" x 5" x
3.6", black [save for future use]
Hardware
J (4)
I (6)
(I) lock nuts (J) Phillips head screws
(K) metric socket cap head screws and lock washers
Cords
•
AC Power Cord
•
USB 2.0 A/B 3 Meter Cable
•
DB9F to DB9F Serial Cable, 10FT
•
USB to Serial Adapter
Tool needed, but not supplied:
• Phillips screwdriver
15908
C
F
H
K (2)
1
Consider placement
Consider the following when choosing where to place
the Cubiscan 110-XT:
• Maintain minimum of 1 inch clearance on each side
• Don't rest or lean objects on it when not in use
• Place on a flat, sturdy surface free from vibration
• No extremes in temperature or humidity
• Far from open freight doors
• No direct air blowing on it
• Protect it from static electricity
Unpack
2
1
Lift the back panel and freestanding display from the
box and set them aside.
With two people, carefully lift the platform from the
2
box on the shorter edges, gently lifting one edge at a
time.
3
Place the platform on a stable work surface with the
front sensor at the front of the work surface.
801.451.7000
cubiscan.com