Dish Network Tailgater Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Antena Dish Network Tailgater. Dish Network Tailgater 2 halaman. Portable antenna
Juga untuk Dish Network Tailgater: Panduan Pengguna (18 halaman)
Halaman Cetak
SETTING UP YOUR
SETTING UP YOUR
RECEIVER WITH TAILGATER
RECEIVER WITH TAILGATER
6.
Power Up System
a.
Plug in your receiver to
a 110V power source.
b.
The green power light on
your receiver should be lit
or begin cycling on and off.
Wait for the green light to
turn solid.
If the green power light does
not turn solid within two minutes,
power on your receiver using the
front panel POWER button.
c.
Turn on your TV. The "Portable
Antenna Setup" screen displays.
This may take up to two minutes.
Your TV should be set to display input from the cable(s) you selected in step 4.
Consult your TV user's manual to select the correct input.
If the "Portable Antenna
Setup" screen does not
display, press MENU, 6, 1, 1
on your remote. Verify the
Check Switch button is
highlighted then press
SELECT on your remote.
7.
Scan for Receiver Signal
Your Tailgater requires an unobstructed view of the southern sky for the best
signal reception. Verify the Tailgater is in a location free from obstructions such
as people, trees, buildings, vehicles, etc. This will allow for the strongest signal
and will help prevent any interruption to the scan.
a.
Use your remote to select the
state you are currently located in
from the "Portable Antenna Setup"
screen. Verify the Scan button is
highlighted, then press SELECT on
your remote.
The scan may take several
minutes to complete.
The "Attention" message
displays.
b.
When the scan is complete, the
"Acquiring Signal" message
displays. This process may take
up to 5 minutes to complete.
If the signal acquisition was
unsuccessful, verify there is nothing
Scan will automatically start in: 5 minutes
blocking the Tailgater's view of the
southern sky and the coaxial cable is
connected. Then, unplug the receiver
power cord for 10 seconds and plug it
back in. It may take up to 5 minutes
for the receiver to power back on.
c.
After the receiver has acquired
the signal, the electronic program
guide downloads to your receiver.
The download may take up to 5
minutes to complete.
longer if an external hard drive is
connected.)
d.
Your setup and activation were
successful when television
programming becomes available.
Check a few different channels to
verify that all of your television
programming is available. If
necessary, call DISH Network at
1-800-333-DISH (3474) to activate
your receiver.
4
Scan will automatically start in: 5 minutes
(Potentially
FAQs
Can I run my Tailgater antenna, DISH receiver, and TV from my vehicle?
Yes, you can use an inverter to power your system from your vehicle's DC power supply
(12 V power outlet). If you plan to watch TV for more than a few hours, be sure to start
and run your vehicle for a few minutes every hour. A portable power generator or
alternative accessory battery may also be a better option for operating your system.
Will my Tailgater work during inclement weather?
Though rare, heavy rain, snow, or dense cloud cover can reduce the satellite signal, which
may interrupt your programming. Your programming will return as conditions improve.
Can I add DVR functionality (record and pause live TV) to my receiver?
Your receiver has a port on the back where you can attach a USB external hard drive, adding
DVR functionality for a one-time service fee of $40. For more information or to see if your
receiver is applicable, go to www.dishnetwork.com/supportsection/dvrconversion.
Where can I go for additional assistance with my Tailgater?
If any trouble develops that is not addressed by the Troubleshooting tips in your
User's Guide, you should go to www.dish.com/support or contact DISH Network
at 1-800-333-DISH (3474).
How do I keep my Tailgater from being stolen?
To prevent theft, your Tailgater has a security bracket located at the bottom of the carry
handle. Secure your Tailgater to a fixed object using a padlock and security cable
(not included).
Is my Tailgater compatible with a different model receiver?
Please visit www.dish.com/tailgater for a complete list of compatible receiver
models available from DISH Network and more information about the Tailgater.
Troubleshooting
For more troubleshooting symptoms, please refer to your Tailgater
User's Guide or visit www.dish.com/tailgater.
Symptom/Message
Possible Cause
Complete Signal Loss - 015
Obstructions to the antenna's
view of the southern sky, such
as tree branches, severe rain, etc.
Partial Signal Loss - 002
Cabling not connected properly
between the DISH receiver and
the portable antenna.
All Satellites Not Found - 150
Obstructions to the antenna's
view of the southern sky, such
as tree branches, severe rain, etc.
Your physical location may be
outside the footprint of the
desired orbital slot.
My remote is not working
Your remote is not currently
paired with your receiver.
5
Troubleshooting
1) Make sure nothing is blocking your portable
antenna's view of the southern sky, such as,
tree branches, severe rain, or other
obstructions.
2) Check that the coax between your DISH
receiver and the portable antenna is
connected properly.
3) Unplug the power cord of your receiver for
10 seconds and plug it back in. It may take
up to 5 minutes for the receiver to power
back on.
1) Make sure nothing is blocking your portable
antenna's view of the southern sky, such as,
tree branches, severe rain, or other
obstructions.
2) Unplug the power cord of your receiver
for 10 seconds and plug it back in. It may
take up to 5 minutes for the receiver to
power back on.
1) Check to make sure the batteries are
properly inserted in your remote.
2) Set up your remote control:
• Press the "SYSTEM INFO' button on the front
panel of your receiver. The "System Info"
screen displays.
• Press and release the SAT button on your
remote control.
• Press and release the RECORD button.
You may see the remote address change
on the screen.
• Press and release the SELECT button on
your remote to continue.
6