Aroma Professional ABD-700 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Blender Aroma Professional ABD-700. Aroma Professional ABD-700 8 halaman.

Halaman Cetak

PARTS AND FEATURES

CONTAINER LID

The Aroma Professional Blender comes with a heat resistant, easy to clean lid with an opening

to accommodate the included Lid Cap, Funnel, and Tamper. To place the Container Lid on

the Container hold it by the Lid Tab. Insert that corner into the corner closets to the container

handle then press down on the remaining corners until the Container Lid is tightly secure. To

remove the Lid, hold the Container down while lifting the Lid Tab.

•

To avoid splashing, potential scalding from hot liquids, and other potentially

serious injuries, make sure the Lid is always on while the machine is running.

WARNING

LID CAP

The Lid Cap features a unique cross-shaped design to allow for ventilation, making it safe to

use while blending hot liquids while preventing splashing or scalding. With the Container Lid

secure, insert the Lid Cap by fitting the cross-shaped end into the opening and pressing down

until it is tightly secure. To remove, hold the Container Lid down with one hand while twisting

the Lid Cap until it is loose enough to remove.

FUNNEL

With the Container Lid secure, insert the narrow end of the funnel into the lid opening to make

it easier to pour liquids or finer foods into the Container without spilling.

TAMPER

Maneuver the Tamper through the opening of the Container Lid to press ingredients into the

blades.

•

Do not use the Tamper without the Container Lid to ensure that the Tamper does

not come in contact with the blades. Since the Tamper's splash disc covers the

WARNING

entire opening on the Container Lid, do not use it while blending hot foods, as this

can cause an unsafe build-up of pressure or steam.

PARTS AND FEATURES

BLADES

The Aroma Professional Blender comes equipped with a unique set of powerful horn-shaped

serrated blades that are suitable for both wet and dry blending. They are made of 420-J2

stainless steel hardened with an electrolytic surface treatment and spin on two rust resistant

SUS 440 zinc alloy bearings.

•

Blades are sharp and can cause serious injury. Do not put hands into the

Container while the blender is on or when the Container is on the base.

WARNING

CONTROL PANEL

MODE SWITCH: The Mode Switch has three positions: TIMING, OFF, and INFINITY. In

TIMING mode, the unit will run for the duration specified by the Preset Time Switch. In

INFINITY mode, the unit will continue to run until shut off manually. In OFF mode, the unit

will not start.

POWER KNOB: The Power Knob turns the unit on and allows the user to control the

speed of the blades from MIN to MAX. The Knob is only active if the Mode Switch is set

to either TIMING or INFINITY.

PRESET TIME SWITCH: The Preset Time Switch has three settings: 35 seconds, 60

seconds, and 120 seconds. When the Mode Switch is set to TIMING, the unit will run for

whichever duration the Preset Time Switch is set to.

•

For best results and safety, we recommend always setting the Mode Switch first

before starting the blender using the Power Knob.

WARNING