Aroma360 Davinci360 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Aroma360 Davinci360. Aroma360 Davinci360 2 halaman.
Juga untuk Aroma360 Davinci360: Panduan Pemecahan Masalah (2 halaman)

Halaman Cetak

At a Glance

POWER

The bottom silver button on the side of the unit is used to turn the

DaVinci360 on and o . Press once for on and once for o .

FAN

The switch on the top of the di user controls the fan. Turning on the fan

will increase the coverage area. The circle pressed in indicates the fan is

o , the dash pressed in means the fan is on.

LOCK SETTINGS

The lock setting will prevent any tampering with the unit's programming.

To lock the settings, hold down the SET button for 20 seconds. A short

beep will confirm the settings have been locked. You will need to unlock

the unit to adjust the settings. To do so, hold the SET button again for 20

seconds and the short beep will indicate the settings have been unlocked.

FACTORY RESET

If you want to reset the unit to factory settings, hold down the MODE

button for 20 seconds and the unit will return to the following settings:

8am – 10pm at 60% for seven days/week.

What's included:

• The DaVinci360 Di user Unit

• 200 mL Aluminum Bottle

• 12V Adapter Cord

• Wall Mounting Brackets

• Spare Nozzle (Black Cone Shaped Piece)

• Two Keys

Understanding Your DaVinci360

The DaVinci360's LCD display provides valuable information about your

settings. Here is a quick guide on what each item means.

WORK/PAUSE —When the unit is in WORK mode, it is emitting scent. When

the unit is in PAUSE mode, it is not emitting scent.

TIME — The number displayed on the unit should represent the current time,

using the 24-hour clock.

DAY OF THE WEEK — The DaVinci360 allows you to have di erent settings for

di erent days. The day that's shown on the display should be the current day.

SCENT/WORK/PAUSE — This screen appears when adjusting the scent

intensity level and the number represents a percentage. 5 is the lowest setting

which means the scent intensity is 5% and 95 is the highest which means the

scent intensity is 95%.

Setting Up Your DaVinci360

Unbox your new DaVinci360 and familiarize yourself with the parts and

accessories.

Insert the adapter into the DaVinci360's power source and plug the adapter

into the outlet. Press in the power button located on the side of the di user

to turn it on.

Now that the di user is powered on, you may begin adjusting the settings to

your liking. By default, the LCD screen will depict the current time. Note the

unit uses a 24-hour clock so 5:30p.m. will be shown as 17:30

Setting the Current Time

To set the current time, press SET, and the hour will flash. Press UP or

DOWN to adjust to the current hour and press set to confirm your choice.

(If your screen is unresponsive, press and hold the SET button for 20

seconds).

The minute will now be flashing. Press UP or DOWN to adjust to the

current minute and press SET to confirm your choice.

The day of the week will now be flashing. Press UP or DOWN to adjust to

the current day of the week and press SET to confirm

W W W. AROMA 360.COM

5 6 1 . 2 0 6 . 0 0 5 3

Setting the Operating Hours and Scent Intensity

Now it's time to set your event "operating" periods. The DaVinci360

allows up to five individual event operating periods so you can scent at

various times on di erent days of the week. For each operating period

you will need to set the "ON" time, days of the week "OFF" time and

scent intensity level

To set start time of a scenting period: Press MODE. EVENT 1 ON will

appear. This represents the On time for the first operating period. Press

SET and the hour will flash. Use the arrows to adjust the hour up or

down. Once satisfied with your selection, press SET and the minutes will

flash. Adjust as needed, press SET and the days of the week will flash.

Use the arrows to select the days you'd like to apply the settings to.

Once satisfied with the EVENT 1 ON info, you can set the end time of the

scenting period: Press MODE. EVENT 1 OFF will appear. This represents

the O Time for the first operating period. Set time as instructed above.

Press MODE and "SCENT, WORK, PAUSE" will appear on the screen.

This is the scent intensity level represented as a percent. Press the up or

down arrows to adjust the scent level. 5 is the lowest setting and 95 is

the highest.

Once you have the desired scent intensity, press MODE and EVENT 2

ON will appear. This will allow you to set the On Time and scent intensity

for the second and remaining working periods if you plan on using

multiple day/time settings If you only have one working period, then

press MODE until you reach the end of the event settings to confirm your

current settings.

Setup Tips

•

Ensure there are no conflicting settings.

The unit cannot be set to run past midnight. You must split the setting

•

between two di erent operating periods. For example, if you want the

unit to run from 10pm – 4am, it would be set as follows:

i. EVENT 1 ON — 22:00 EVENT 1 OFF — 23:59

ii. EVENT 2 ON — 00:01 EVENT 2 OFF — 04:00

Technical Specifications

UNIT DIMENSION

VOLTAGE

POWER

NOISE LEVEL

UNIT WEIGHT

COVERAGE

COLOR

DISPERSION

7 ¼ x 3 ½ x 9 (inches)

18.4 x 8.89 x 22.86 (cm)

DC12V

8 watts or 0.67 amps

<56dba

9 lbs.

(4.08 kgs)

800 sq. ft.

(74.3 m2)

Black or white

HVAC or Stand-Alone