Dish TV S9020DVD Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima Dish TV S9020DVD. Dish TV S9020DVD 12 halaman. Dvd+dvb-s combo receiver

Halaman Cetak

User Interface

1.Quick Installation
1.1 Setting Language
User can select preferred language at Setup Installation General Setting page.
(1) Press <Menu> button to enter Main Menu.
(2) Press <Left/Right> button to select SETUP option.
(3) Press <Up/Down> button to select Installation option.
(4) Press <Up/Down> button to select General Setting option.
(5) Press <OK> button to enter General Setting page.
(6) Press <Up/Down> button to select the language option.
(7) Press <Left/Right> button to set a language.
1.2 How to receive the programs?
Scan the satellites to receive the programs.
1.2.1 Satellite configuration
Satellite configuration and manager is in Main Menu->Setup->Installation->MY DISH
menu.
Firstly, select the proper swither according to the swither you have, as Figure 1.For
sample switcher, each branch is connected with a satellite, user can configuration it
as Figure 2.
SETUP- Installation ( MY DISH )
01/01/07 00:02
Switch Type
NONE
Toneburst
OFF
NONE
Switch
Move
Exit
Figure 1.Satellite Installation
For DiSEqC1.2 motor, user can set limit position, user location and LNB of it, as ,then
user can adjust and store max 32 position for different satellites, as Figure 3, Figure 4.
SETUP- Installation ( MY DISH )
01/01/07 00:02
Switch Type
DiSEqC 1.2/USALS
Page 1/8
NONE
Position 01
NONE
Position 02
NONE
Position 03
NONE
Position 04
Move
Switch
Exit
Set Limit
Set Location
Set LNB
Figure 3. DiSEqC1.2 Setting
SETUP- Installation ( MY DISH )
01/01/07 00:02
Edit
Switch T
Satellite Name
Toneburs
LNB Type
LNB Low Freq
LNB High Freq
22K Tone
LNB Power
Transponder
Strength 00%
Quality
00%
Exit
Add SAT
Figure 2.Add Satellite
SETUP- Installation ( MY DISH )
01/01/07 00:03
Switch Type
DiSEqC 1.2/USALS
Page 1/8
Set Limit
Move Continue
Stop
NONE
Position 01
Move Step
Stop
Goto Ref.
GoTo
NONE
Disable Limit
Position 02
Clear
NONE
Position 03
NONE
Position 04
Move
Switch
Exit
Set West Limi
Set East Limit
Figure 4. DiSEqC1.2 Motor Limitation
User Interface
Switch Type: select DiSEqC1.0/1.2 switcher or DiSEqC1.2 motor, or select none if you
don't have any DiSEqC device.
Toneburst: enable or disable toneburst switcher.
Move down to the satellite selection area, and press OK key to add the proper satellite,
as Figure 2.
LNB Type: select the LNB type according to your dish.
LNB Low Freq: set the low frequency of LNB.
LNB High Freq: set the high frequency of LNB if it is universal.
Then user can press BLUE key to scan the focus satellite or RED key to scan multi-
satellites, as Figure 5.
Scan Mode: select Blind-Quick or Blind-Detail for blind scan, or Default to scan the
default transponder list.
Programme: select to receive all programs or only free programs.
SETUP- Installation ( MY DISH )
1.2.2 Transponder configuration and scan
If there exist satellite in the database, then user can edit and scan transponder in the
menu Main Menu->Setup Installation-> TP MANAGER, as Figure 6.
Press <Left/Right> button to select satellite;
Press <Up/Down> button to select transponder.
Press <OK/Up/Down/Left/Right/0~9>, user can edit Frequency, Symbol Rate or
Polarity of the transponder.
Press <BLUE> button to scan the focused transponder.
SETUP- Installation (Transponder Manager)
Add
Figure 6. Scan for Transponder
3
01/01/07 00:03
Switch Type
NONE
OFF
Toneburst
Scan Mode
Scan Mode
Blind-Detail
Programme
All
7.0 E
Move
Switch
Scan
Exit
OK
Figure 5. Scan Mode
01/01/08 00:19
Satellite Name
EUTELSAT W3A
No.
Frequency
Symbol Rate
Polarity
001
10928
30000
H
00 00
002
11345
27500
H
003
11471
30000
H
004
11513
27500
H
005
11554
27500
H
006
11595
30000
H
007
11637
30000
H
008
11679
30000
H
S Q
Move
Switch
OK
Edit
Exit
Del
Delete All
Scan