Dishlex DX103 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Dishlex DX103. Dishlex DX103 16 halaman. Freestanding dishwasher
Juga untuk Dishlex DX103: Panduan Pengguna (16 halaman), Panduan Instalasi (3 halaman)
Halaman Cetak
3
To remove filters B and
C, turn the handle ap-
proximately 1/4 anti-
clockwise.
5
Put the filter A in the bot-
tom of the appliance. In-
stall the flat filter correctly
under the two guides D.
Important! Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a cocktail stick.
External cleaning
Clean the external surfaces of the appliance and con-
trol panel with a damp soft cloth. Only use neutral de-
What to do if...
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem
yourself. Refer to following charts. If you cannot find a
solution to the problem yourself, contact your dealer or
the Customer Care Centre.
4
Remove the flat filter A
from the bottom of the ap-
pliance.
6
Put the filter system in po-
sition. To lock the filter
system, turn the handle
clockwise until it locks in
position
tergents. Do not use abrasive products, scouring pads
or solvents (acetone etc.).
Internal cleaning
Do an inspection at intervals of 3 months. Set a washing
program for heavily soiled dishes. Use detergent, but
do not put dishes in the appliance.
Long periods of non-operation
Do these steps when you do not use the appliance for
a long period:
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Keep the door open to prevent unpleasant smells.
4. Keep the inner side of the appliance clean.
Frost precautions
Caution! Do not install the appliance where the
temperature is below 0 °C. The manufacturer is
not responsible for damage because of frost.
If not possible, empty the appliance and close the door.
Disconnect the water inlet hose and remove water from
the water inlet hose.
Moving the machine
Do these steps to move the appliance:
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Remove the appliance and the hoses.
4. Do not tilt the appliance during transport.
Warning! Switch the appliance off before you do
the suggested corrective actions.
9