Display DT-VMMv2 Panduan Instalasi - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perabotan Dalam Ruangan Display DT-VMMv2. Display DT-VMMv2 20 halaman. Projector vertical mirror mount
Halaman Cetak
HANGING THE PROJECTOR
1]
Lift the projector up to align it with the
mount plate on the wall
2]
Lift the projector so that the hooks on
the projector plate engage with the rods
on the mount plate and pushed right
back.
3]
Slide in the two lock plates and tighten
the lock bolts.
Ensure that the lock plates
are fully pushed up to the silver
hanging bar and are bolted tight
to prevent any movement.
Installation Manual – Revision 2.0
Fig.6. Mount Plate with projector alignment
15