DISPLAYLITE DST-4600T Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor DISPLAYLITE DST-4600T. DISPLAYLITE DST-4600T 10 halaman. Capacitive touch table

Halaman Cetak

3. Unit Placement

You should install the product in an area where it may be used safely and

comfortably. Unit placement should satisfy the following qualifications.

Space

Install the product ensuring enough space for multiple users.

Please provide enough space for users to sit or stand at all edges of the table.

- Enough space to accommodate the size of the product.

- Enough space to approach from all sides without any limitations.

- Enough space to interact around the display without feeling any discomfort.

- Place the product giving consideration to hallways or traffic corridors.

Installation Environment

Make sure that there are no heating or air conditioning ducts near the product.

sudden temperature changes may disrupt the product.

- Make sure the intake and exhaust vents are not blocked or impeded.

Cable Connection

Besides power, you may need to connect network cable and other external devices.

After preparing proper cables and connections, make sure that there is enough

space to connect all required cables.

Electrical power

A power cable is included for connecting the product. Consider the distance between

the table and power source, cable length, and routing when choosing your location.

Route the power cable safely. People may fall or trip on the cable, causing damage

or personal injury. Only use the power cables that were provided with the product.

If the power cable and power mains in the install location are not compatible, please

contact your service representative or qualified electrician. Do not use a non-standard

power supply.

Location Optimization

Consider the product's visibility, environmental cleanliness, and noise.

- Install the product in a location where users can easily access it.

- Use the product in a clean, unobstructed environment.

- Clean the product and its surrounding environment regularily.

- Eliminate or reduce the volume of any background noise competing with the product.

- Consider that the product's noise or noise from users may interfere with other

occupants of the surrounding environment.

4. Unpacking the Display

Check all safety precautions before installing the product. All environmental factors

(unit placement, power supply, etc.) outlined in this manual must be adhered to fully.

In situations where users do not adhere to cautions and warnings, personal injury

or property damage may result.

Caution! With 2 or more people, move the box

into the area where the product will be installed.

Prepare a soft surface to lay the display face down

in order to prevent any scratches or damage. Ensure

you have enough space so that you may lay the

display flat on its front face.

Remove any banding or plastic wrapping from

the box. Remove the 4 interlock handles and

lift the Main Box directly upward and

away from the unit.

Remove the Upper Cushions (L & R). Remove

the Product Bag. You may remove the display's

Protective Film at this time or do so after you

have completed assembly.

Caution! With 2 people lift the display upward,

away from the Lower Cushions (L & R) and the

Bottom Box. Gently place the display glass

downward onto a soft surface in the area

you have prepared to perform the

installation.

Main Box

Upper Cushions

Product Bag

Display

Protective Film

Lower

Cushions

Bottom Box

Interlock Handles