Displays2go FDEDGECTA Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perabotan Dalam Ruangan Displays2go FDEDGECTA. Displays2go FDEDGECTA 5 halaman. Edge-lit collaboration station

Halaman Cetak

Connect Wires in Back Panel

1 1. Plug LED light cord into wired outlet.

12. Pull cords through plastic bracket and

plug into to internal power strip.

13. Pull power cord out through panel

keyhole.

14. Slide in back panel (C) and secure

with M4 x10mm screws (M). Plug

unit's power cord into wall outlet.

Remote Control

• Aim the remote control directly at the

LED strip.

• If remote control does not initially

control the LED strip, hold the ON

key down for 5 seconds to pair. The

light strip flashes slowly to indicate

successful pairing.

If you have any questions regarding our products, please visit us at www.displays2go.com or

contact Displays2go customer service at 844-221-3388.

Dimmer Up / Down

Pause Light Program

x 3

LED On / Off

LED Color Pad

Program Controls