3D Systems ProJet 7000 Instruksi Kerja - Halaman 4
Jelajahi secara online atau unduh pdf Instruksi Kerja untuk Printer 3D 3D Systems ProJet 7000. 3D Systems ProJet 7000 7 halaman. Manual resin stirring procedure
Halaman Cetak
Title: Work Instruction – ProJet 6000/7000 Manual Resin Stirring Procedure
Doc: 283584-00
Rev: A
• Go to the "Advanced" screen and select "Elevator/Leveler."
5
• Select "Drain Print Tray."
• Let the resin drain until the resin level in the print tray is about 2" below the rim.
• Install the propeller shaft to the drill.
• Ensure that you have the appropriate protective equipment on (gloves, googles, lab coat).
6
• Open the machine door.
• Remove any visible debris in the print tray.
3D SYSTEMS CONFIDENTIAL
Description: ProJet 6000 and 7000
Date: 9/11/14
Page: 4 of 7