Displays2go IPDTBL Manual Petunjuk Perakitan - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Rak dan Dudukan Displays2go IPDTBL. Displays2go IPDTBL 8 halaman. Ipad stand

Align holes of the iPad holder to the

post fixings. Insert and tighten 2 screws

to secure. Rotate iPad holder through

90º, aligning remaining 2 holes to post

fixings. Insert and tighten final screw to

secure (in diametrically opposite hole

from tightened screw in stage 8).

NB – If you are not using cable management for charging, unlock the iPad enclosure by

inserting key into security lock and rotate 'QUARTER TURN ONLY' clockwise or counterclockwise

through 90 degrees which releases the locking pin. Return key back to original position to remove.

Lift fascia out of enclosure, and place iPad inside, gently pressing all four corners down into

mouldings to hold.

Plug charge/sync cable into iPad and

place inside enclosure, gently press

all four corners of iPad down into

mouldings to hold.