Displaysense Lectern LT950 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Rak dan Dudukan Displaysense Lectern LT950. Displaysense Lectern LT950 2 halaman.

General Instruction Sheet

Lectern LT950

Step 1

– Get one angled side (B) – with handle cut out,

and the long back piece (D).

Tip

- Ensuring these are the correct way up, use 4 socket screws and

associated fixing points to join these together. We recommend you

turn each screw 4 or 5 turns before tightening fully - this will help to

align the panels.

Step 2

– Once completed, take the 2

and attach to the back piece in the same manner as

above.

Step 3

– Take the shelf panel (C), fix this to the central

fixing points in the side and back pieces previously

assembled.

Tip

- Attach the front strip before attaching the shelf.

Step 4

– Balance the unit carefully with the angled end

resting on a soft surface, align the base

bottom of the central column and fix using socket

screws and fixings points as before.

Now carefully turn the unit the correct way up.

Step 5

– Take the top shelf

fixing points on the top of the sides and back assembly.

Tip

- Fix one point first, turn four or five times before moving on to

the next. Complete and tighten each one to complete the

assembly of your lectern display.

Tip2

- Attach the front strip before attaching the top to the unit.

Notes

Do not over tighten screws.

We recommend that when movement or turning of the unit is

required, 2 persons be used to avoid damage to unit.

When cleaning the unit we recommend that you use our

Acrylic/Perspex cleaner together with our Perfect polishing cloth.

Page 2 of 2

angled side (B)

Base) to the

Top) and align this with the