Distech LonWorks ECL-400 Series Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol Distech LonWorks ECL-400 Series. Distech LonWorks ECL-400 Series 17 halaman.
Halaman Cetak
Jumper Identification and Configuration
Controllers have the following onsite configurable jumpers.
6 / 16
Wireless
Port
Net to Subnet Settings
Enabled
Disabled *
Subnet
Net Port
Port
Figure 8:
ECL-203 Controller Jumper Locations
Wireless
Port
L
W
Network Board
ON
ORKS
Net to Subnet Settings
Enabled
Disabled*
Subnet
Net Port
Port
Figure 9:
ECL-300 Controller Jumper Locations
Wireless
Port
Typical locations :
ECL- 600 ONLY: Subnetwork
L
W
Network Board
ON
ORKS
EOL Off
(Disabled)*
Net to Subnet Settings
Enabled
Disabled *
EOL Off
(Disabled)*
Subnet
Net Port
Port
Figure 10:
ECL-400 Series and ECL-600 Series Controller Jumper Locations
* Factory- default position
Universal Outputs (UO)
0- 10V / 0- 20 mA Select
0-10V*
0- 20mA
Universal Inputs (UI)
0- 20 mA Enable / Disable
0- 20 mA
0-20 mA
Disable *
Enable
* Factory- default positions
Quantity may vary according to controller model
Universal Outputs (UO)
0- 10 V / 0- 20 mA Select
EOL Termination
0-10V*
EOL On
(Enabled)
OR
EOL On
(Enabled)
Universal Inputs (UI)
0- 20 mA Enable / Disable
0- 20 mA
Disable *
* Factory - default positions
0- 20mA
0-20 mA
Enable