Abbra AbbraLink Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Panel Kontrol Abbra AbbraLink. Abbra AbbraLink 20 halaman. Professional series
Halaman CetakUsing the bracket as a guide, drill
three holes in the wall and screw the
bracket in place. The large circle at the
bottom of the bracket is for the tamper
retainer washer, which also needs a drill
hole. Using the tamper retainer washer
ensures that if there is an attempt to rip
the control panel off the wall, a tamper
alarm will occur.
mounted, slide the control panel onto it.
Step 5 – Registering For
Your Monitoring Account
Once the Control Panel and sensors are
installed at home, then you are ready to
link your Abbra system to the monitoring
service. In order to activate your account,
you will need to register online. Check
your email for a message from
NextAlarm.com containing information
about your online account.
If have not received the email two days
after ordering your Abbra, please contact
NextAlarm at (877)639-8911.
Go to www.nextalarm.com and click
on the button marked "Login".
Once the bracket is
Enter your email and password when
prompted, then follow the on-screen
instructions to finalize your account.
At this time, you may also program
your Abbra by clicking "Program Panel".
Follow the onscreen instructions or
consult the main Installation Guide for
assistance with configuration options.
Step 6 – Testing Your
System
Make sure all you windows and doors are
closed and motion sensors are
undisturbed. The Control Panel screen
should display READY. If it does not,
please consult the troubleshooting
section of the main User Guide.
To test the system, follow these
instructions:
- Activate your Abbra system by pressing
the ON AWAY button on your Keychain
Remote Control.
- Wait for the Exit Delay countdown
beeping to end.
- Now open a door or window and allow
the emergency sounder to trigger. NOTE:
If the door you have opened is your main
entry door that has an Entry Delay, you
will have to wait for the Entry Delay to
expire before the emergency sounder will
trigger.
The Abbra has a built-in test function
which may be used for future tests. For
this first test, we recommend triggering
an actual alarm. For information on the
test function, please consult the User
Manual.
User Settings
Now that you have installed your Abbra
security system, you should program in a