Acoustic Energy 103 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Acoustic Energy 103. Acoustic Energy 103 8 halaman. 1 series

Connections (101 and 103*)

Check that your ampli er is switched o before installing your

loudspeakers. Failure to do so may result in speaker or ampli er

damage.

The positive cable from the ampli er positive (or red) terminal should

connect with the positive (red) terminal on the loudspeaker. Similarly

the negative cable should connect the ampli er negative terminal

(black) to the negative terminal (black) on the loudspeaker.

After wiring up, lower the volume to the minimum, switch on the

ampli er, select the signal source and then raise the volume to the

listening level required.

(diagram for illustration purposes only)

Speaker

(Rear)

Ampli er (Rear)

- +

*For 107 and 108 models please refer to ampli er instruction manual

as many con gurations are possible and will vary.