3D Upfitters Carbon Air Filter Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer 3D 3D Upfitters Carbon Air Filter. 3D Upfitters Carbon Air Filter 12 halaman. Air filter & vents

Halaman Cetak

DIY/Miscellaneous Vent Adapters

3DUPﬁtters has a wide variety of vents designed to meet your custom venting needs. They

are

designed to work with standard 3" or 4" clothes dryer hose available in any hardware store.

Adjust the hose clamp to be right next to the ridge for the best ﬁt.

The adapters are intended to be ﬂexible so you can design a conﬁguration that's best for your

situation. Here's an example setup with the CR-10/Taz6/Ender 5 Plus vent kit. For this you'd

need to order a hose, clamps, and dryer window vent from your hardware store.

The Prusa/Ender setup is a bit more complicated since window inserts are all 4", while the

hose we recommend is 3". This setup adds an 3"->4" hose adapter, and the 3" hose is small

and doesn't overwhelm the small enclosure. Note that with this setup you need 2 3" clamps

and 1 4" clamp.