3dBanRC BanRC2 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mainan 3dBanRC BanRC2. 3dBanRC BanRC2 16 halaman.

Accessories:

Super glue CA.

CA glue spray Accelerator

hinge 15 x 28.5 mm. Qty = 14

3mm claw nut. Qty = 4.

Screw M3x20mm. Qty = 2

Screw M3x30mm. Qty = 2

1mm piano steel wire. Qty = 2

3mm pushrod 1 meter. Qty = 2

Plywood 2mm

Fuselage and wing screws support. Plywood 2mm. You can print these frames and sketch them on

the plywood for presice cut. They are remarked to easy know the location of each after printing.

Inside fuselage part 3

Inside fuselage part 4

Front Wing Support

Rear Wing Support

20x3mm

30x3mm