3DChimera Pololu A4988 Manual

Jelajahi secara online atau unduh pdf Manual untuk Printer 3D 3DChimera Pololu A4988. 3DChimera Pololu A4988 3 halaman. Reference voltage check for x400

Halaman Cetak
REVISION
A01
> INTRODUCTION
This procedure is intended to guide you through the process of checking the reference voltages for the
Stepper Driver controllers on the X400, also known as Pololu A4988.
> PROCEDURE
1. Determine your Stepper Motor Type
Type: MOONS Motor
2. Remove hardware from bottom blue panel of printer. Once removed, tape to the build plate
with blue painter's tape.
5246 SW 8
X400 Pololu Reference Voltage Check
DATE
02/14/17
CONFIDENTIAL & PROPRIETARY
DO NOT DISTRIBUTE
ST, STE 204-A . Coral Gables, FL. 33134 || 786.701.0700 || www.3DChimera.com
TH
DESCRIPTION
Initial Release
Type: FULLING Motor
PAGE 1 OF 3
AUTHOR
AH