CAME BK-2200T Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembuka Pintu Garasi CAME BK-2200T. CAME BK-2200T 17 halaman.

Unit installation

During the initial phase of installation, the feet should protrude by 5-10 mm. in order to allow for alignment, anchorage of the rack and

further adjustments.

Perfect alignment with the guide rail is made possible by the (paten-ted) built-in regulation system, which consists of:

- slots for horizontal adjustment;

- threaded steel feet for vertical adjustment and levelling;

- plates and bolts for anchorage to the base.

Cable entrances

Attaching the rack/limit

Attach the rack to the gate as described below:

- Release the gearmotor (parag. 5.8);

- position the rack on the pinion of the gearmotor and slide the gate manually in order to attach the rack along its entire length;

- when the rack is attached to the gate, adjust the feet using a screwdriver until the play between the pinion and the rack is correct

(1,2 mm.).

N.B.: This position ensures that the weight of the gate does not rest on the gearmotor.

- If the rack is already attached, proceed directly to the adju-stment of the rack/pinion coupling.

- when the necessary adjustment have been completed, fasten the unit in position by tightening the two anchor bolts.

Rack-to-pinion coupling

with 1,2 mm clearance

Horizontal adjustment

and unit anchorage

Vertical adjustment and

unit leveling