CAME V900E Instalasi Standar - Halaman 7
Jelajahi secara online atau unduh pdf Instalasi Standar untuk Pembuka Pintu Garasi CAME V900E. CAME V900E 13 halaman. Automatic traction system for overhead and sectional doors
Halaman Cetak
L N
M N
L
230V (a.c.) power supply
N
M
24 (d.c.) motor
N
Powering accessories (max 40W)
+ 10
- 24V (A.C.) with power supply at 230V (A.C.)
- 11
- 24V (D.C.) with power supply at 24V (A.C.)
10
24V output in motion (e.g. 25 W max. flashing light)
E
1
Pushbutton stop (N.C.)
2
2
Contact (N.C.) for «re-aperture during closure»
C1
2
Pushbutton for commands (N.O.) "OPEN-STOP-CLOSE-STOP"
7
Antenna connection
1 ON - Encoder programming; it enables the procedure for
the calibration of the opening and closing end-stop.
2 Not used, keep the dip in position OFF.
Trimmer T.C.A. = Automatic closing time adjustment. N.B.:
by adjusting the minimum, the automatic closure function
is excluded.
Trimmer SENS. = Amperometric sensitivity adjustment.
RED LED:
- light on, memorizing of the limit-switch (encoder);
- slow intermittent light, memorizing of the radio board and
automatic-closing count;
- rapid intermittent light, signals the presence of an obstacle
or an anomaly on the device connected to contacts 2-C1.
GREEN LED:
- constant light, signals the power supply in the control
board (goes off when power not supplied and each time the
total stop button is pressed).
ELECTRICAL CONNECTIONS
10 11 E 1 2 7 C1
+ E -
SELECTION OF FUNCTIONS
FUNCTIONS CONTROL LED
FUS. MOTORE 7.5A
+ E -
26V17V 0V
M N
FUS. CENTR.
315mA
ZL56
ADJUSTMENTS
FUS. MOTORE 7.5A
+ E -
26V17V 0V
M N
FUS. CENTR.
315mA
ZL56
FUS. MOTORE 7.5A
+ E -
26V17V 0V
M N
FUS. CENTR.
315mA
ZL56
N.B. All the contacts and push-buttons
normally closed (N.C.) that are not used
must be short-circuited.
T.C.A.
SENS.
AP / CH
APRE
ENC/RADIO
ON
1
2
AF
T.C.A.
SENS.
ENC/RADIO
AP / CH
APRE
ON
120"
1
2
max.
AF
T.C.A.
SENS.
AP / CH
APRE
ENC/RADIO
ON
1
2
Green led
AF
ON
1
2
T.C.A.
1"
SENS.
min.
Red led
7