Aerix TURBO-X Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Drone Aerix TURBO-X. Aerix TURBO-X 12 halaman.

INSTALLING BATTERIES IN CONTROLLER

Please load the batteries with the correct polarity, as shown below:

CHARGING DRONE

- Connect charging cable to the drone FIRST, then plug the USB side in.

- It is recommended to charge with a computer USB port, not a wall adapter.

- The red light will be OFF while charging and ON when fully charged.

- Promptly remove the cable from both the USB and drone upon full charge.

- DO NOT LEAVE drone unattended while charging.

GETTING STARTED

1. Place the TURBO-X Drone on a flat LEVEL surface and turn power on

2. Align joysticks as shown in (Figure 1), Left stick down, right stick center

3. Turn the controller on by sliding the power switch to the left

4. Power Indicator light will begin flashing, indicating it is ready to pair

5. Move left joystick FULLY UP (Figure 2) then FULLY DOWN (Figure 3)

6. Lights on both the TURBO-X and the Controller will remain solid

7. Your TURBO-X and Controller are now paired and ready for flight!