Altman AFS-700 Instalasi & Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Instalasi & Panduan Pengguna untuk Sorotan Altman AFS-700. Altman AFS-700 15 halaman. Led follow spot

INSTALLATION INSTRUCTIONS / INSTRUCTIONS D'INSTALLATION

CLEANING AND CARE

WARNING! All cleaning should be performed with power completely removed from the luminaire. Never

remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves

when cleaning the fixture. All service and maintenance, other than described herein, should be performed

by a qualified technician or Authorized Service Center. AT NO TIME SHOULD THE LED BE TOUCHED.

Special Cleaning and Care Instructions

Being a solid-state fixture, and unlike most fixtures, the AFS-700 LED Follow spot Luminaire requires

very little routine maintenance by the user.

The AFS-700 LED Follow spot Luminaire requires special care when it comes to cleaning front lens

assembly. Additional care needs to be taken with the plastic components because they are much easier to

scratch or damage than glass.

The following is a list of cleaning materials required to care for your AFS-700 LED Follow spot :

• Lint free lens tissue

• Lint or powder free gloves

• Reagent grade isopropyl alcohol*

• A mild soap solution.

If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and

not cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat

the cleaning with isopropyl alcohol to eliminate streaks and soap residue.

WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents

be used on or near the AFS-700 LED Follow spot Luminaire. These types of cleaners or solvents can

permanently damage the optics or housings of the fixture.

If you have any questions regarding the use or care of your AFS-700 LED Follow spot Luminaire,

please contact Altman Lighting technical support or your local Authorized Dealer.

To clean each lens:

Step 1. Turn off luminaire and allow to cool completely.

Step 2. Remove the front Plastic cowling and slide the lower panel forward to allow lens cleaning access to

both sides of each lens.

Step 3. Apply a small amount of reagent grade isopropyl alcohol to lint-free lens tissue.

Step 4. Wipe all debris, dirt, fingerprints, etc. from lens.

Step 5. Using a second lint-free lens tissue, wipe off any alcohol residue.

As the AFS-700 is a fan cooled luminaire each of the fan filters will require routine cleaning to

ensure fixture longevity and reliability. Failure to carry out this routine maintenance will void the

fixtures warranty.

Using a Philips head screw driver remove the fan dust filter on the top of the unit. Clean via dry low

velocity compressed air from the underside of the filter.

AFS-700 LED Follow Spot

AFS-500 LED Follow Spot Product Specifications