Alto HPA6 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Alto HPA6. Alto HPA6 14 halaman. 6-channel headphone amplifier
Juga untuk Alto HPA6: Panduan Pengguna (14 halaman), Panduan Pengguna (13 halaman)

Halaman Cetak

6 MODE SWITCH

Depress the switch if you want to hear a stereo signal. Press it again if you

want to hear a mono signal.

7 MONO Led:

When the MODE switch is engaged this Led will light up.

8 HEADPHONE OUT

This connector is wired in parallel with the correspondent output connector on

the rear panel. It is useful to connect headphones when your HPA6 is installed

into a rack.

9 BALANCE CONTROL

This knob has a double function. When the AUX IN input is not in use it will

regulate the stereo imaging of the input signal. When a signal is fed into the

AUX IN input, the balance control will regulate the ratio of MAIN IN (or

DIRECT IN) and AUX IN input signals.

10 OUTPUT GAIN

This knob controls the output volume of the channel. Both right and left signals

are regulated at the same time.

11 OUTPUT LEVEL

This 4-digit led meter tells you about the level of the output signal, and the

range goes from -24 dBu to +12 dBu. When the Clip LED lights up, please

turn down the Output Gain Control to avoid any distortion.

3. CONTROL ELEMENTS