Acoustic Research AWD211 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Headphone Acoustic Research AWD211. Acoustic Research AWD211 12 halaman. Wireless 2.1 stereo headphones

Halaman Cetak

The following troubleshooting guide takes you through some of the more common

problems associated with the installation and/or operation of a wireless system. If the

problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com.

No sound

•

Make sure the transmitter's power adapter is fully inserted into the wall outlet and

the power cord from the AC adapter is ﬁ rmly connected to the transmitter power

input jack.

•

Check that the audio source component (stereo, TV, etc.) is turned on and

transmitting sound as it normally should. If you're using a PC or DVD player, make

sure you've selected the correct audio output and that the sound is not muted.

•

Conﬁ rm that the headphones are turned on and that the transmitter is receiving

audio—the transmitter's indicator light should be blue. If the transmitter's indicator

light is blue and you still don't hear sound from the headphones, press the pair

button on the back of the transmitter and the pair button on the right headphone

simultaneously for three seconds.

•

Check that the headphone volume is turned up.

•

If you're using a variable output audio source (like a headphone jack or variable

output on a TV set), make sure the source component's volume is set high enough

for the transmitter to detect.

Interrupted sound

•

Move closer to the transmitter with the headphones on. Sending the signal

through certain materials, such as glass, tile, and metal, can decrease the effective

transmitting distance of the system.

Distorted sound

•

High-output sources, such as DVD players or audio receivers/ampliﬁ ers, may cause

distortion if used at full volume with the transmitter. Try setting them at 1/2 or 2/3 volume.

ROUBLESHOOTING