Camelot Sharper Image 204519 Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Jam Alarm Camelot Sharper Image 204519. Camelot Sharper Image 204519 4 halaman. Sound soother alarm clock with nightlight

Halaman Cetak

2. The MONTH will flash. Use the UP and DOWN

buttons to set the MONTH. Press the SET button

again to confirm the MONTH and move on to the

next setting (DATE).

3. The DATE will flash. Use the UP and DOWN

buttons to set the DATE. Press the SET button

again to confirm the DATE and move on to the

next setting (HOUR).

4. The HOUR will flash. Use the UP and DOWN

buttons to set the HOUR. Press the SET button

again to confirm the HOUR and move on to the

next setting (MINUTE).

5. The MINUTE will flash. Use the UP and DOWN

buttons to set the MINUTE. Press the SET

button again to confirm the MINUTE and finish

programming.

NOTE: Once the Date and Time are set, you may

select 12- or 24-hour time format by pressing the

UP button.

NOTE: If the display disappears, simply place the

device on a flat surface to make it reappear. There

is a pressure sensitive switch on the bottom that

must be pressed in order for the display to appear.

SETTING THE ALARM

1. Press the MODE button ("M") to enter Alarm

Mode.

2. Press the UP button to cycle through the two

Alarm functions:

AL (solid) = Alarm is activated

AL (flashing) = Alarm is activated + Snooze

function activated

NOTE: If "AL" is not displayed, the Alarm is OFF.

• Once you are in Alarm Mode, press the SET button

and use the UP and DOWN buttons to set the

ALARM HOUR.

• Press the SET button again and use the UP and

DOWN buttons to set the ALARM MINUTE.

• Continue pressing the SET button and the

using UP and DOWN buttons to set the SNOOZE

INTERVAL (1-60 minutes) and the ALARM SOUND

(1-7).

NOTE: Alarm Sounds 1-5 are the Soothing Sounds

listed above. Alarm Sound 6 is a blend of all 5

Soothing Sounds. Alarm Sound 7 is a traditional

electronic beep.

• When the Alarm goes off, you will hear the Alarm

Sound you selected, and the light will ascend and

turn ON.

SILENCING THE ALARM / OPERATING

THE SNOOZE

• To silence the alarm, press the Sound button.

To turn the light OFF, tap any part of the

aluminum strip.

• If the Snooze function is activated, press the

Sound button ONCE to put the alarm in Snooze

Mode. (The letters "AL" will be flashing.) During

Snooze Mode, the alarm will turn OFF temporarily,

and then resume after the Snooze Interval which

you previously selected (see above).

• To turn the Snooze OFF, press the Sound button

again. The letters "AL" will be solid, indicating that

the Snooze is OFF.

CHANGING THE TEMPERATURE DISPLAY

• Press the DOWN button to switch between Celsius

and Fahrenheit display.

COLOR CHANGING NIGHTLIGHT

• Switch ON the Colorful Light switch on the back of

your device. When the room is dark, the LEDs will

create a pleasing cycle of alternating colors.

- 3 -