3Dlabs X400 Panduan Memulai Cepat & Referensi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat & Referensi untuk Printer 3D 3Dlabs X400. 3Dlabs X400 16 halaman.

MOVING THE PRINTER

Make sure to place the printer on a very sturdy table or work surface to minimize vibrations



during printing.

The rear of the printer must be accessible to load and unload filament, and for safety reasons.



We recommend at least 1 foot behind the printer from any wall.

Work surface must be a minimum of 23" x 25".



The X400 is a heavy machine, so the work surface should be strong enough to accommodate



150lbs at least.

2 people are required to lift the X400. Do not attempt to move it by yourself!



Any bumps or shocks could throw off the leveling of the bed, gantry, or other parts in the



machine, so lift and set it down carefully.

1. Remove the plastic protection film from the side, top, and front door panels.

2. Remove plastic from the touch screen.

Page | 6