Alto CS 1020 PE Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Cuci Tekanan Alto CS 1020 PE. Alto CS 1020 PE 20 halaman.

2.5

Nozzle Table

Only use the nozzles indicated on the table below. With high pressure hoses of lengths beyond 50 m, the next

size larger nozzle is to be applied. (f.ex.: instead of 2505, use 2506).

Depending on the kind and extent of dirt involved, and according to the cleaning job to be performed, the

appropriate high pressure nozzle(s) is(are) to be chosen.

The working pressure as such is pendent from the high pressure nozzle. The high pressure nozzle required can

be taken frem the TABLE below.

Please note: The pressures indicated under 'Technical Data', as well as those pressures mentioned in the nozzle

table hereunder, may deviate for the following reasons:

a) production tolerance(s) high pressure nozzles

b) speed deviation(s) of drive motor

pressure

bar

high-pressure nozzle

130-150

110-130

95-110

75-95

* standard supplied nozzles

CS 1020 PE

CS 1020 DE

nozzle type

recoil

nozzle type

spraying angle

15° 30° 60°

*2505

25055

1506 2506

5006

1507 2507

5007

recoil