Alto X-P234 Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Crossover Alto X-P234. Alto X-P234 18 halaman. 2-way/3-way stereo, 4-way mono active crossover
Juga untuk Alto X-P234: Panduan Pengguna (8 halaman)

Halaman Cetak

To get such a typical application, configure your system and connect the wires in the following proper steps:

1. Press the left button, and release the right button to enter into the stereo 2-way operation mode.

2. Apply the stereo program sources from the Mixer to the Input Connectors of Channel1 and Channel2.

3. Output the Low frequencies signal to the power amplifier.

4. Output the High frequencies signal to the power amplifier.

5. Power up the X-P234 first, then the power amplifier to run the system. While powered off, please ensure the

power amplifier is turned off first, then the X-P234.