3DR ArduCopter Quad-C Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Drone 3DR ArduCopter Quad-C. 3DR ArduCopter Quad-C 19 halaman.

Attaching Propellers

To attach the propellers use the collets included. Cut the plastic ring included with the

propellers that ﬁts snug around the threaded collet and insert it into the slot in the back

of the propeller. Place the collet on the motor shaft and tighten to keep the propeller in

place. Make sure the writing on the propeller is facing up. Refer to the diagram above

for correct prop rotation direction.

Note: It is recommended that you balance your propellers

prior to installing.