Alto Professional APX1500 Panduan Memulai Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penguat Alto Professional APX1500. Alto Professional APX1500 8 halaman.
Halaman Cetak
SPECIFICATIONS
POWER SPECIFICATIONS
•
Continuous power @ 0.5% THD, both channels driven, 230V:
o 4Ω: 2 x 550W
o 8Ω: 2 x 350W
•
Power EIAJ@ 1% THD, both channels driven, 230V:
o 4Ω: 2 x 750W
o 8Ω: 2 x 370W
•
Bridge Mono Mode:
o 8Ω: 1 x 1500W
o 16Ω: 1 x 740W
ELECTRICAL SPECIFICATION
•
INPUT SENSITIVITY: 1.0V
•
INPUT IMPEDANCE: 10 KΩ unbalanced
•
FREQUENCY RESPONSE: (at 10dB below rated output power) 20 Hz~25
KHz (+0/-3 dB)
•
VOLTAGE GAIN: 32 dB
•
DISTORTION: (SMPTE-1M) <0.5%
•
S/N ratio: >110 dB
•
Inrush Current at initial switch on: 8.24A
•
Inrush Current after power supply interruption: 9.30A
GENERAL SPECIFICATIONS
•
PROTECTIONS: ON/OFF, muting,
fault fuses
•
CONTROLS Front: AC switch
•
CONTROLS Rear: Low pass filter, mode selector
•
SIGNAL INDICATORS: 2 green LED CLIP: 2 red LED
•
POWER INDICATORS: 1 Blue LED PROTECTION: 1 red LED
•
INPUT CONNECTORS: Balanced combo
•
OUTPUT: "Touch-proof" binding posts and Speakon jacks.
DIMENSIONS
•
WxLxH: 19" x 11.2" x 3.5" (483mm x 285mm x 89mm)
WEIGHT
•
12.1 lb; 5.5kg
DC-fault load grounding relay. Internal
7