3DR Y6 Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drone 3DR Y6. 3DR Y6 8 halaman.
Juga untuk 3DR Y6: Panduan Perakitan (13 halaman)

Add propellers

Your copter includes normal propellers (unmarked or marked "SF") and

pusher propellers (marked "SFP" or "P"). The direction of each motor is

shown below: add pusher propellers to motors marked clockwise, add

normal propellers to motors marked counterclockwise. Use 10-inch

props for top motors and 11-inch props for bottom motors.

Blue arms

CCW

Remove prop nuts and attach propellers

Remove plastic rings from propeller package, select the one with

the larger internal diameter, and insert it into the back of the

propeller hub.

Remove prop nut and metal spacer

from motor. Add propeller with writing

facing up in relation to the sky. This

means you'll need to attach props to

bottom motors upside down! Replace

spacer and prop nut; tightly fasten

prop nut to threaded collet.

We recommend inserting a hex wrench

(2 mm) into the hole in the side of the

prop nut to get better leverage when

tightening prop nuts.

Safety Check! Ensure writing on props faces up.

Your 3DR Y6 unboxing is complete! For pre-flight

configuration and flying instructions, please visit:

copter.ardupilot.com/apmcopter. Happy flying!

CCW

Y6 motor order

CCW

COUNTERCLOCKWISE ROTATION:

CCW

USE NORMAL PROPELLER

CLOCKWISE ROTATION:

USE PUSHER PROPELLER

Plastic ring

Collet

Prop nut

Spacer

Propeller

Motor