AkitikA STEREO 400 Panduan Memulai Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Komputer AkitikA STEREO 400. AkitikA STEREO 400 11 halaman. Pc30 replacement
Halaman Cetak
Section 2: Building the PC30 Board
This section details the process of building the PC30 board. Warm up your soldering iron
and clean the tip. The soldering your about to do will be much easier if your iron is tuned
up and ready.
Find the PCB as shown in Figure 1.
Figure 1-PCB for the PC30 Replacement Board
We'll start with the components that sit closest to the PCB, the resistors. Then we'll
move on to the diodes. Finally, we'll install the IC's and capacitors.
Page 5 of 11